HT-PASTE Spray (MC-6116) 500ml
99,63 zł z VAT
Enables the most difficult disassembly of bolted connections without damaging threaded joints after many years of operation.
The most effective assembly grease with Nano-boron nitride and non-metallic solid lubricants for long-term protection of bolted, fitted connections (both ferrous and non-ferrous metals, INOX, Aluminum) that work at very high temperatures and in highly aggressive environments.
It has an anti-corrosive effect, protects external and internal surfaces of bolted connections against corrosion. It forms a tight protective layer.
Does not contain any metallic additives.
Does not cause electrolytic corrosion.
Guarantees a constant low friction moment when tightening connections and seals the connections.
Used during disassembly to ensure slip and restore damaged threads.
Enables disassembly of severely damaged threads protruding above the nut.
Recommended where the use of copper, aluminum, nickel, graphite pastes does not work.
It adheres very well and does not wipe off, while being white, it does not stain,
compared to graphite, molybdenum, aluminum and copper greases.
Neutral for various plastics, rubbers, elastomers, seals, all metals, polymers, etc.
22 in stock
Darmowa wysyłka dla zamówień powyżej 135 zł
- Wysyłka w ciągu 24 h
- Możliwość odbioru osobistego (Swadzim, wielkopolskie)
- Bezpieczna przesyłka
Description
Excellent mounting paste for brake pads, exhaust mufflers
Application
- Mounting paste for exhaust parts, suspension parts, brake sensors, ABS, brake pads, drum shoes, noisy mechanisms, metal-metal-plastic-rubber contact
- Mounting paste used before assembling bolted (screwed) connections: Screws, nuts, studs..
- Mounting paste used for fitted connections, press-fit joints, flange connections…
- Assembly grease for seals, burners, boilers, heating elements,
- Mounting paste for disassembly, to ensure slip and restore damaged threads
- Mounting paste excellent as an adhesive separator for molds
- Assembly grease especially recommended for INOX and aluminum connections, and all types of metals
- Assembly grease for running-in gears and open gears
Instructions for Use
- Apply preferably to a clean and dry surface. Best results are achieved when we degrease and remove old grease residues with a solvent, e.g.: CITRUS CLEANER.
- Mix the aerosol well before use. Apply by spraying directly on the element from a distance of 20-30cm, wait for the fluid to penetrate, repeat if necessary.
- After a few minutes, the solvent evaporates and a durable lubricating coating is formed.
