NANOCLEAN® AC8 foam for car air conditioning disinfection 400ML

Description

Removes organic contaminants: mold, fungi, dust, grease, oil, greasy stains from upholstery and carpets, vomit, feces, blood, wine, decaying food, organic waste, etc.

Not only air conditioning mold removal, but also full-spectrum air conditioning disinfection
Eliminates unpleasant odors
Permanently removes the unpleasant smell of fungi and the foul odor of organic waste.

User Instructions

Surface disinfection
Apply the product to the surface with a foaming tip or wipe with a clean wipe that does not leave fibers, maintaining contact time up to 15 minutes to ensure bactericidal, fungicidal, yeasticidal, virucidal, sporicidal and mycobactericidal efficacy. After using the product, surfaces in contact with food should be rinsed with water intended for consumption.

Disinfecting split-type air conditioning in rooms

1. Turn off the air conditioner and open the indoor unit.
2. Remove the filter, vacuum it, rinse under running water (bathtub, shower).
3. Spray the washed filter with NANOCLEAN® AC8 aerosol and leave for 15 minutes, rinse with water and dry.
4. Thoroughly spray the evaporator inside the air conditioner with NANOCLEAN® AC8 spray. Wait 15 minutes. The product will flow through the fins to the condensate tray, from where it will be drained.
5. Install the filter in the air conditioner, close the indoor unit and turn on the air conditioner to complete the process.

Disinfecting air conditioning in vehicles

1. Turn off the air conditioning.
2. Remove the pollen filter at the windshield or inside the cabin under the dashboard.
3. We recommend blowing out all ventilation grilles and ducts in the cockpit with compressed air, e.g., AIR PB SPRAY.
4. Make sure you have direct access to the evaporator in the car. Sometimes fan removal is required.
5. Remove the nozzle with hose from the NANOCLEAN® AC8 aerosol cap and install in the can. Shake the can vigorously.
6. Insert the hose with the nozzle into the evaporator channel. Position the can vertically.
7. Dispense the product for about 30 seconds until the 400ml aerosol is empty.
8. Remove the dispensing hose and wait 15 minutes for the biocidal action of the product and its drainage through the air conditioning drain channel under the car.
9. Install a new pollen filter.
10. Turn on the air flow to the so-called open circulation, and set the fan speed to maximum power.

“Biocidal products should be used with caution. Read the label and product information before each use.”