AC-FOAMCLEAN Concentrate 5kg
300,00 zł z VAT
Active, Strong Alkaline Foam for Cleaning Air Conditioning Units
✅ Strongly cleans and degreases most surfaces of heat exchangers in air conditioning units. Penetrates and detaches dirt from the cleaned surface, then dissolves it.
✅ Dissolves greases, oils, waxes, fat, road and rail dirt, resins, ink, dried dirt on
surfaces, bituminous dirt, tobacco residue, blood, roof dirt, water deposits, organic dirt: leaves, grass, bark, etc.
✅ Very economical to use, most often used with water at a 5% concentration (1:20).
✅ Active foam is very adhesive, does not run off vertical surfaces for 5 minutes and enables more effective touchless cleaning.
✅ Universal, multi-purpose alkaline cleaner.
✅ Biodegradable according to OECD standards.
✅ Compatible with paint coatings, plastics, elastomers, fabrics, wood, ceramics, and metals: (including aluminum alloys, copper, provided it’s rinsed with water after cleaning).
20 in stock
Darmowa wysyłka dla zamówień powyżej 135 zł
- Wysyłka w ciągu 24 h
- Możliwość odbioru osobistego (Swadzim, wielkopolskie)
- Bezpieczna przesyłka
Description
Application
- The prepared working solution from AC-FOAMCLEAN concentrate is one of the few that easily removes baked-on greasy dirt, oils, lubricants, grease, baked-on grease, dried dirt from hard surfaces, and old food stains.
- Removes organic dirt: moss deposits, rust, oils, mud, leaves, resins, all dirt on roofs and facades.
- Cleans external air conditioning units, brightens condenser fins, electronic air filters, ventilation grilles, oily equipment, and mechanical parts.
- Works perfectly for cleaning ventilation ducts in frying areas, bar kitchens, kebab shops, food service establishments, etc.
- Also recommended for washing automotive and rail transport vehicles: cars, trucks, locomotives, wagons, etc.
- Perfectly cleans engines, aluminum rims, transmissions, chassis, bodywork, and painted surfaces.
- Used in every industry, including: for removing oils, greases, road contaminants, bituminous residues, dirt, in service stations, workshops, engineering.
- Cleans industrial floors, oily asphalt surfaces, industrial equipment, walls, painted surfaces, lighting, glass, wood, plastics, tiles, laminates, and terracotta.
Instructions for Use
- Excellent for manual washing, immersion, pressure washing, and in foam washers.
- Before use, dilute with water depending on the purpose and level of dirt – the following concentrations:
- Most commonly used at a 5% concentration (1:20).
- Heavy cleaning (removing grease and oils): 1:10 to 1:4 (10-25%) with cold or warm water.
- General cleaning: 1:50 to 1:10 (2-10%) with warm or cold water.
- Pressure washing: 1:200 to 1:20 (0.5-5%) with cold or warm water.
- Cleaning painted surfaces: 1:100 to 1:20 (1-5%) with water.
Apply the product to the surface being cleaned, wash manually or wait 3-5 minutes for the dirt to run off, and rinse with pressurized water. Repeat the process if necessary.
Note: Do not allow the product to dry on the surface. Final rinsing with water is recommended.
Safety:
Users should avoid direct skin contact and wear protective gloves and eye protection. Read the SDS safety data sheet before use.
